1. GENERAL INFORMATION
1.1. PURPOSE OF THE MANUAL
- The manual is an integral part of the machine and is aimed at providing the operator with the “Instructions for
use” in order to prevent and minimise the risks that arise from human-machine interaction.
The information has been written by the Manufacturer in Italian (the original language) in full compliance with
the professional writing principles and the regulations in force.
The communication principles were chosen according to the target readers in order to ease the reading and
understanding of the information.
The information may be translated into other languages to satisfy the legal and/or market requirements.
The manuals must be translated directly from the original instructions, without modifications.
Each translation (including that provided by the purchasing agent or by the company that introduces the machine
into the country in question) must specify the message “Translation of the original instructions”.
-
Refer to the table of contents in order to easily identify the subjects of interest.
-
Some information may not correspond completely to the actual configuration of the machine delivered.
-
Any additional information does not affect the readability of the text and the safety level.
-
The Manufacturer reserves the right to modify the contents of the manual without prior notice provided that the
safety level is not altered.
-
Every notification by the recipients can be an important contribution to the improvement of after-sales services
that the manufacturer intends to offer to its customers.
-
The symbols described below are used to highlight important information or specifications.
To Next Page
Loading...
