7. MAINTENANCE INFORMATION
7.1. RECOMMENDATIONS FOR MAINTENANCE
- Proper maintenance will allow a longer life span and constant compliance with safety requirements.
- Before performing any operation, the authorised operator must make sure to have understood the “Instructions
for use”.
- Pay attention to the safety warnings, do not misuse the machine and assess the possible residual risks.
- Carry out the interventions with all the safety devices enabled and wear the required PPE.
- Indicate the intervention areas and prevent access to the devices that, if activated, could cause unexpected
hazards and compromise safety.
- Do not carry out interventions that are not described in the manual but contact an service centre authorised by
the Manufacturer.
- Do not dispose of materials, polluting liquids and the waste generated during the interventions into the
environment but dispose of them according to the standards in force.
Danger - warning
Before performing any maintenance operation, activate all safety devices provided and evaluate whether
it is necessary to inform the personnel operating on the machine and the personnel nearby.
In particular, demarcate the neighbouring areas to prevent access to the devices that could, if activated,
cause unexpected hazardous conditions posing a risk for people’s safety and health.
Danger - warning
Maintenance operations must be performed with the machine disconnected from the power and pneumatic
supplies.
The periodical check of the operation of some of the most important parts of the machine, may help to
avoid operation problems and to maintain the machine to the maximum operating levels.
To Next Page
Loading...
