Robopac ECOPLAT PLUS BASE - Lubricant Table

65
MAINTENANCE INFORMATION
ENG
7.4. LUBRICANT TABLE
The table below lists the specifications of the lubricants recommended by the Manufacturer for each component and/or
reference area.
Use lubricants (oils and greases) recommended by the Manufacturer or with similar chemical-physical features.
Lubricant characteristics
Lubricant type
Code
Parts to be lubricated
Mineral oil
23°C / 50°C - 320 CST 40°C
MELLANA OIL 320 IP
SPARTAN EP 320 ESSO
BLASIA 320 AGIP
MOBILGEAR 632 MOBIL
OMALA EP 320 SHELL
ENERGOL GR-XP 320 BP
Gear reduction unit
Mineral oil
32°C / 50°C - 460 CST 40°C
MELLANA OIL 460 IP
SPARTAN EP 460 ESSO
BLASIA 460 AGIP
MOBILGEAR 634 MOBIL
OMALA EP 460 SHELL
ENERGOL GR-XP 460 BP
Worm screw reduction unit
Grease
TELESIA COMPOUND B IP
STRUCTOVIS P LIQUID KLUBER
TOTALCARTER SYOO TOTAL
Gear reduction unit and worm screw
reduction unit
Synthetic oil
TELESIA OIL IP
SYNTHESO D 220 EP KLUBER
BLASIA S 220 AGIP
Gear reduction unit and worm screw
reduction unit
Lithium grease
ALVANIA R2 SHELL
HL 2 ARAL
ENERGREASE LS2 BP
BEACON 2 ESSO
MOBILIX MOBIL
Bearings with support
Synthetic oil
-5°C / +5°C VG 68 (SAE 20)
+5°C / +25°C VG 100 (SAE 30)
Film carriage lifting chain
Synthetic oil
+25°C / +45°C VG 150 (SAE 40)
+45°C / +70°C VG 220 (SAE 50)
Table rotation chain
Important
Do not mix together oils of different brands or having different characteristics.