What to do if wrapping terminates too close to the product edge with Robopac SPIROR HP Packaging equipment?
If wrapping terminates too close to the product edge when using Robopac Packaging equipment, decrease the “tail positioning” time.
What to do if Robopac SPIROR HP displays E64 "FILM RUPTURE" Alarm?
If the Robopac Packaging equipment displays an E64 "FILM RUPTURE" Alarm, it means the film has broken or the reel is empty. To fix this, insert a new film or replace the reel.
What to do if Robopac SPIROR HP Packaging equipment displays E02 “AIR LACK” ALARM?
If the Robopac Packaging equipment displays an E02 “AIR LACK” ALARM, this is due to a faulty pressure switch or a lack of air in the plant. Check the pressure switch or reactivate the air supply to resolve this.
What to do if Robopac Packaging equipment displays E30 FAULT INVERTER OVERLOAD?
If the Robopac Packaging equipment displays an E30 FAULT INVERTER OVERLOAD, it indicates an error with the inverter. To address this, check the alarm on the inverter display and refer to the technical manual.
What to do if wrapping terminates too far from the product edge with Robopac SPIROR HP?
If wrapping terminates too far from the product edge when using Robopac Packaging equipment, increase the “tail positioning” time.
How to fix non-compact wrapping laps in Robopac SPIROR HP Packaging equipment?
To fix non-compact wrapping laps in Robopac Packaging equipment, check if the spool has been mounted correctly according to the film’s adhesive side.
What to do if Robopac SPIROR HP Packaging equipment displays E68 “STOPPER NOT IN POSITION” ALARM?
If the Robopac Packaging equipment displays an E68 “STOPPER NOT IN POSITION” ALARM, the clamp cylinder magnetic sensors are not properly working. Check and replace the sensor if necessary.
What to do if Robopac SPIROR HP Packaging equipment displays E69 “WELDER NOT IN POSITION” ALARM?
If the Robopac Packaging equipment displays an E69 “WELDER NOT IN POSITION” ALARM, the clamp cylinder magnetic sensors are not properly working. Check and replace the sensor if necessary.
What to do if Robopac Packaging equipment displays E42 ROTATING RING IMPROPERLY TIMED?
If the Robopac Packaging equipment displays E42 ROTATING RING IMPROPERLY TIMED, it means that the rotating ring is improperly timed. Check the rotation Home sensor.
What to do if Robopac Packaging equipment displays E15 WARNING “DOOR VIOLATION CHECK ALARM”?
If the Robopac Packaging equipment displays an E15 WARNING “DOOR VIOLATION CHECK ALARM”, the safety module found a discrepancy among the 2 micro-switches placed on the cover. You should check the micro-switches on the cover.
Provides operator instructions to prevent and reduce risks from machine interface.
Describes the identification plate applied on the machine with its references.
Defines recurring terms used in the manual for clarity and understanding.
Details how to contact ROBOPAC for technical support or spare parts.
Lists documentation provided with the machine, including manuals and software.
Explains how the handbook is divided and how to use it for efficient information retrieval.
General safety guidelines to follow for safe operation and handling of the machine.
Safety precautions for personnel involved in machine handling and installation.
Essential safety rules for operating the machine correctly and preventing accidents.
Defines the intended use of the machine for wrapping stable-shaped products.
Highlights risks that persist even after safety measures are applied during design.
Guidelines for maintenance and adherence to regulations for safe operation.
Safety precautions related to the machine's electrical system and operating conditions.
Identifies and describes the safety and information signs affixed to the machine.
Provides an overview of the machine's function, models, and main components.
Details the different wrapping cycles performable by the machine.
Explains the function and purpose of various safety devices installed on the machine.
Identifies and describes the positioning of electrical components on the machine.
Details the positioning and function of pneumatic devices on the machine.
Lists optional accessories that can be supplied with the machine.
Presents detailed technical specifications for HP and DR models.
Defines the necessary working and surrounding areas around the machine.
Provides measured noise levels during machine operation.
Specifies recommended environmental conditions for machine installation.
Provides essential guidelines for safe and proper machine handling and loading.
Describes the machine's packaging for transport and handling.
Details methods and precautions for transporting the machine by various vehicles.
Explains how to safely lift and move the machine using a forklift.
Outlines the steps required for installing the machine and its dismantled parts.
General advice for performing adjustments safely and effectively.
Describes how to adjust pressure platens for secure product holding.
Details the procedure for adjusting film wrapping tension for optimal results.
Explains how to adjust guide rollers for product length and alignment.
Provides crucial advice for operating the machine safely and efficiently.
Details the function of main controls like the master switch and emergency button.
Describes the touch screen interface for setting parameters and monitoring operations.
General guidance and safety precautions for performing maintenance operations.
Lists scheduled maintenance tasks and their recommended intervals.
Illustrates lubrication points and intervals for machine parts.
Specifies recommended lubricants (oils and greases) for machine components.
Procedure for draining condensate from pneumatic system components.
Instructions for cleaning the pneumatic system filter.
Describes how to adjust the tension of the rotating ring belt.
Explains how to adjust the tension of the product infeed unit chain.
Guidelines for general machine cleaning to maintain efficiency.
Provides solutions for common operational problems encountered during machine use.
Lists displayed alarm messages, their causes, and remedies.
General advice and safety precautions for replacing machine parts.
Step-by-step instructions for safely replacing the film cutting blade.
Procedure for replacing the belt of the rotating ring unit.
Guidelines for safely replacing fuses in the machine's control panel.
Provides a list of critical spare parts recommended for availability.
Instructions for the safe and compliant disposal of the machine and its parts.
Details the warranty terms, coverage, and user obligations.
Technical diagram illustrating the pneumatic circuits for the SPIROR HP model.
Technical diagram illustrating the pneumatic circuits for the SPIROR DR model.
General| Brand | Robopac |
|---|---|
| Model | SPIROR HP |
| Category | Packaging equipment |
| Language | English |
To Next Page
