Robopac SPIROR HP - Types of Stopping and Starting; Temporary Stop (Voluntary); Electric Black-Out Stop

SPIROR HP - DR
6.11. TYPES OF STOPPING AND STARTING
During operation there can be voluntary or unforeseen conditions that stop the machine.
T
hese are the
p
ossibilities
:
―
temporary stop (voluntary).
―
electric black-out stop.
―
production end stop.
―
Emergency stop.
6.11.1. TEMPORARY STOP
(VOLUNTARY)
It can occur for a brief work pause, a few
minutes.
1. Press the "STOP" button (B).
i
Danger - Warning
The machine is still running, just press
the START button to restart.
To restart operation:
1. Press the "Start" button (C).
6.11.2. ELECTRIC BLACK-OUT STOP
In case of voluntary interruption of electric power supply, machine stops immediately.
T
he electric motors sto
p
and the
p
neumaticall
y
o
p
erated com
p
onents remain still in their
p
osition.
When electric power supply returns, the machine does not continue its operating cycle but remains still in the
same position.
T
o restart operation
:
1. Operate the “reset” key (D) to bring the
various parts in phase.
2. If necessary remove the product to be
wrapped or partially wrapped from the
machines.
Press the (A) switch to reset cycle.
3. If you want to continue working press the
(C) Start.
English
77/95