SPIROR HP - DR
5. INFORMATION ON ADJUSTMENTS
5.1. RECOMMENDATIONS FOR ADJUSTMENTS
‒ Before performing any operation, the authorised operator must make sure that he/she understood the
"Instructions for use".
‒ Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED PURPOSES and assess
the possible RESIDUAL RISKS.
Important
Before carrying out any adjustment operations, activate all the safety devices provided for, and evaluate if it is
necessary to adequately inform the operating personnel or the personnel nearby.
In particular, confine the neighbouring areas to impede access to the devices that could, if activated, produce
unexpected danger conditions provoking hazards to personal safety and health.
5.2. PRESSURE PLATEN PRESSURE ADJUSTMENT
1. Based on the type of product, adjust pressure using the knob (A) so that the pressure platens securely
hold the product without deforming it.
Pressure can be read on the pressure gauge (B).
Important
he adjustment of the pressure of the pressers is set during the inspection phase to an optimal value for the
product to wrap.
English
To Next Page
Loading...
