Robopac SPIROR HP - General Information; Purpose of the Manual

SPIROR HP - DR
Summary
1. GENERAL INFORMATION
1.1. PURPOSE OF THE MANUAL
1.2. MANUFACTURER AND MACHINE IDENTIFICATION
1.3. TERMS AND DEFINITIONS
1.4. MODES OF REQUESTING FOR ASSISTANCE
1.5. ATTACHED DOCUMENTATION
1.6. HOW TO READ THE DIRECTIONS FOR USE
2. SAFETY INFORMATION
2.1. GENERAL SAFETY PRECAUTIONS
2.1.1. EMPLOYER OBLIGATIONS
2.2. SAFETY WARNINGS FOR HANDLING AND INSTALLATION
2.3. SAFETY WARNINGS FOR USE AND OPERATION
2.4. APPROPRIATE USE OF THE MACHINE
2.4.1. SECURITY WARNING FOR REASONABLY FORESEEABLE IMPROPER USE
2.5. SAFETY WARNINGS ON RESIDUAL RISKS
2.6. SAFETY WARNINGS FOR REGULATIONS AND MAINTENANCE
2.7. SAFETY WARNING FOR ELECTRICAL EQUIPMENT
2.8. INFORMATION AND SAFETY SIGNALS
3. TECHNICAL INFORMATION
3.1. MACHINE GENERAL DESCRIPTION
3.2. DESCRIPTION OF THE OPERATION CYCLE
3.2.1. "TOTAL" WRAPPING
3.2.2. "HEAD - TAIL" WRAPPING
3.2.3. "COMPLETE" WRAPPING AND "CENTRAL BANDS"
3.2.4. "HEAD-TAIL" AND "CENTRAL BELTS" WRAPPING
3.3. SAFETY DEVICE DESCRIPTIONS
3.4. DESCRIPTION OF THE ELECTRICAL DEVICES
3.5. PNEUMATIC DEVICE DESCRIPTION
3.6. ACCESSORIES AVAILABLE UPON REQUEST
3.7. TECHNICAL SPECIFICATIONS (Spiror HP - Spiror DR)
3.7.1. PRODUCT SIZE
3.7.2. FILM SPECIFICATIONS
3.7.3. MACHINE DIMENSIONS
3.8. SURROUNDING AREAS
3.9. NOISE LEVEL
3.10. INSTALLATION ENVIRONMENT CHARACTERISTICS
4. INFORMATION ON HANDLING AND INSTALLATION OPERATIONS
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
4.2. PACKAGE
4.3. TRANSPORT AND HANDLING
4.4. HANDLING AND LIFTING
4.5. MACHINE INSTALLATION
4.5.1. UNPACK
4.5.2. ASSEMBLY INSTRUCTIONS
4.5.3. ASSEMBLY OF THE PRODUCT INFEED UNITS (L = 1500 / 2500)
4.5.4. ASSEMBLY OF SAFETY PROTECTIONS
4.6. RECOMMENDATIONS FOR CONNECTIONS
4.7. PNEUMATIC CONNECTIONS
4.8. ELECTRICAL CONNECTION
English
2/95