Robopac SPIROR HP - Transport and Handling; Handling and Lifting; Machine Installation

SPIROR HP - DR
Spiror
HP 300
Spiror
HP 400
Spiror
HP 600
Spiror
HP 900
Spiror
DR 400
Spiror
DR 600
Spiror
DR 900
L mm 2000 2000 2000 2000 2000 2000 2000
W mm 1700 1700 1700 1900 1700 1700 1900
H mm 2020 2020 2020 2020 2020 2020 2020
A kg 730 736 836 938 736 836 938
B kg 850 860 960 1070 860 960 1070
4.3. TRANSPORT AND
HANDLING
T
ransport, also according to the destination
,
can be performed by different vehicles.
T
he diagram represents the most popular
solutions.
During transport, with the purpose to avoid
sudden movements, adequately anchor the
machinery to the means of transportation.
|
Important
For further transportation, recreate the initial
packaging conditions for transport and
handling.
4.4. HANDLING AND LIFTING
T
he machine can be moved with a forklift wit
h
suitable load capacity by inserting the forks in
the points indicated directly on the machine.
4.5. MACHINE INSTALLATION
Following are the steps to be taken to install dismantled parts.
English
45/95