Robopac SPIROR HP - Accessories Available Upon Request; Technical Specifications (Spiror HP - Spiror DR)

SPIROR HP - DR
|
Important
For further details see the pneumatic diagram.
3.6. ACCESSORIES AVAILABLE UPON REQUEST
‒ Coil carrier H=125 mm
‒ Spacer for spool from 125 mm
‒ Supply lines L=1500 mm with galvanized/PVC/Polyurethane rollers
‒ Supply lines L=1500 mm with belt
‒ Supply lines L=2500 mm with galvanized/PVC/Polyurethane rollers
‒ Supply lines L=2500 mm with belt
‒ Self-centring guides with hand wheel
‒ Self-centring guides with hand wheel/pneumatics
‒ Self-centring pneumatic guides
‒ Short cuts (HP version only)
(Min product L = 600 mm)
‒ Pressure units with Polyurethane rollers
‒ Scissor clamp and rotating cutting (DR version only)
‒ Additional conveyor
Upon request, we can supply conveyors with idle/motorized roller in lengths 1500/2500/3500 mm.
The rollers can be galvanized/PVC/Polyurethane.
You can also request belt conveyors in lengths 1500/2500/3500 mm.
The conveyors can have a double function for product accumulation and further support.
3.7. TECHNICAL SPECIFICATIONS (Spiror HP - Spiror DR)
T
he table below shows the technical s
p
ecifications of the machine (Spiror HP).
Description Units
of
measur‑
ement
Value
Machine Spiror HP
300
Spiror HP
400
Spiror HP
600
Spiror HP
900
Supply voltage 230V 3Ph 50/60Hz (upon request)
400V 3Ph + N 50/60Hz
Installed power kW 2,3 2,5
Absorption A 11 12
Electrical system
protection
IP54
Rotating ring
speed (max)
rpm 260 200 180 130
Product infeed
speed (max)
m/min 58 40 34 29
Product infeed
speed (min)
m/min 18 14 12 10
Total weight kg 700 700 800 900
Worktable height mm 800
Operating
pressure
bar 6 ± 1
English
35/95