SPIROR HP - DR
5. Connect the power supply wires of the
photocells by screwing in connectors.
6. Connect wires to terminals of electric
motors.
Important
If the rotation sense of the rollers is
incorrect, invert the phases on the
terminal box of the motor.
4.5.4.ASSEMBLY OF SAFETY
PROTECTIONS
4.6. RECOMMENDATIONS FOR CONNECTIONS
Important
he connections must be made in accordance with the specifications supplied by the manufacturer in the
enclosed diagrams.
he person authorized to carry out said operation must posses the skills and experience acquired and
acknowledged in the specific sector, must perform the connection workmanlike and keep into account all the
statutory and legislation requirements.
Once the connection has been completed, before commissioning the machinery, it is necessary to perform an
overall control to verify if said requirements have been complied with.
English
To Next Page
Loading...
