SPIROR HP - DR
6.5. CYCLE PARAMETER
SETTING (RECIPE
COMPOSITION)
For this operation proceed in the
following way.
1. Display the main page (see “Operating
terminal description” - “Main screen“).
2. Tap the key (C) to open the general
parameters screen.
3. Touch the key (3) and access via
password, as machine manager (see
“Operating terminal description” -
“Operator and password change”).
4. Touch the home key to go back to the
main screen.
5. Touch one of the (B, C, H, I, L, M, N, O,
P, Q, T) keys to display the required
parameter page.
Note
The key (T) is available only if the cycle
“Head and additional bands winding” has
been selected.
English
To Next Page
Loading...
