Robopac SPIROR HP - Information on Handling and Installation Operations; Recommendations for Handling and Loading; Package

SPIROR HP - DR
4. INFORMATION ON HANDLING AND INSTALLATION
OPERATIONS
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
|
Important
Accomplish handling and loading according to the instructions supplied by the manufacturer to be found on
the machine and in the operating instructions. The person authorized to accomplish these operations must, if
necessary, organise a "safety plan" to guarantee safety to the persons directly involved.
Use normal lifting equipment and means of transport, in accordance with the instructions to be found on the
packaging itself.
T
hose persons responsible for lifting and transportation operations must decide which are the most suitable
means according to the machine’s destination.
Carefully read the "Instructions for use" specified in the manual and those applied directly to the machine
and/or the package.
Provide suitable safety conditions in compliance with the regulations on workplace safety to prevent and
minimise the risks.
Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED PURPOSES and assess the
possible RESIDUAL RISKS.
4.2. PACKAGE
T
he packing is realised, keeping the overall dimensions low, also in consideration of the transport chosen.
T
o facilitate transport, shipping can be performed with some components disassembled and appropriately
protected and packaged.
Some parts, especially electric equipment, are protected with anti-moisture nylon covers.
T
he cases are marked with all necessar
y
information for loadin
g
and unloadin
g
.
Packaging material should be appropriately disposed according to the laws in force.
Packa
g
e on
p
alle
t
(A)
Package in crate (B)
English
44/95