3.6. DESCRIPTION OF ACCESSORIES ON REQUEST
To increase the machine performance and versatility, the Manufacturer makes available the following accessories.
1. Pneumatic presser:
pneumatically controlled device for load stabilisation. It is supplied with pneumatic cylinder with rod (Max.
stroke 800 mm).
The height must be adjusted according to the size of the product to be wrapped.
An air supply system is required for its operation.
2. Mechanical presser:
electrically controlled device for load stabilisation, it is not necessary to adjust the height according to the size
of the product to be wrapped.
3. Pallet loading/unloading ramp:
it facilitates these operations through fork lifting devices (hand pallet trucks).
To Next Page
Loading...