Robustel GoRugged R2000 User Manual

Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.2.0 15.12.2015 11 /120
Confidential
Ethernet Interface
 Number of Ports: 2xLAN or 1 x LAN, 1xWAN (10/100Mbps)
 Magnet Isolation Protection: 1.5KV
WLAN Interface (Optional)
 Standards: 802.11b/g/n, support AP and Client mode
 Data speed: 2*2 MIMO,300Mbps
 Frequency Band: 2.412 - 2.485 GHz
 Security: WEP, WPA, WPA2
 Encryption: 64/128 AES, TKIP
 Antenna Interface: RP-SMA Female
System
 Reset button
 LED Indicators: RUN, PPP, USR, 3 x RSSI
CPU & Memory
 CPU: 535MHz
 SDRAM: 64MB
 FLASH: 16MB
Software
 Network protocols: PPP, TCP, UDP, DHCP, ICMP, NAT, DMZ, DDNS, VRRP, HTTP, HTTPs, DNS, ARP, SNTP, Telnet, etc
 VPN tunnel: IPSec/OpenVPN/GRE
 Firewall: SPI, anti-DoS, Filter, Access Control
 Management: Web, SMS
Power Supply and Consumption
 Power Supply Interface: 3.5mm terminal block
 Input Voltage: 9 to 26 VDC
 Power Consumption: Idle: 100 mA @ 12 V
Data Link: 500 mA (peak) @ 12 V

Robustel GoRugged R2000 Specifications

General

Model	GoRugged R2000
Category	Network Router
Ethernet Ports	2 x 10/100 Mbps
SIM Slots	2
Power Supply	9-36 VDC
USB Port	1 x USB 2.0
Cellular Connectivity	4G LTE, 3G
VPN Support	IPsec, OpenVPN, GRE
Operating Temperature	-40°C to +75°C
WiFi	802.11 b/g/n
Serial Interface	RS232/RS485
GPS	Yes
Firewall	SPI Firewall
Digital Input/Output	2 x DI