Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.2.0 15.12.2015 83 /120
Confidential
3.24 Services->Web Server
This section allows users to modify the parameters of Web Server.
Enter the HTTP port number you want to change in R2000’s Web Server.
On a Web server, port 80 is the port that the server "listens to" or expects to
receive from a Web client. If you configure the router with other HTTP Port
number except 80, only adding that port number then you can login R3000’s
Web Server.
Enter the HTTPS port number you want to change in R2000’s Web Server.
On a Web server, port 443 is the port that the server "listens to" or expects to
receive from a Web client. If you configure the router with other HTTPS Port
number except 443, only adding that port number then you can login R2000’s
Web Server.
Note: HTTPS is more secure than HTTP. In many cases, clients may be exchanging
confidential information with a server, which needs to be secured in order to
prevent unauthorized access. For this reason, HTTP was developed by Netscape
corporation to allow authorization and secured transactions.
Enter the Login timeout you want to change in R3000’s Web Server. After “Login
Timeout”, R3000 will force to log out the Web GUI and then you need to re-login
again to Web GUI.
This section allows users to import the certificate file into the route.
Select from “CA” and “Private Key”.
To Next Page
Loading...
Need help?
General
