Robustel GoRugged R2000 - System->Device Configuration; System->User Management

Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.2.0 15.12.2015 95 /120
Confidential
3.32 System->Device Configuration
Enable or disable the WAN interface.
Advanced Device Settings
Item
Description
Default
eth0 Used As
WAN
Switch button to ON to configure eth0 as WAN interface.
Switch button to OFF, it will disable the WAN interface, eth0 will recovery to be LAN
interface.
OFF
WiFi Mode
Select from “Client” and “AP”.
WiFi AP: When enable the WiFi AP mode, R2000 could be accessed by the specified
Clients. Please go to Interface->WiFi to configure the parameter of WiFi AP.
WiFi Client: When enable the WiFi Client mode, R2000 can access the specified WiFi
AP. Please go to Interface->WLAN to configure the parameter of WiFI Client.
Client
WiFi Region
Specify a two-letter country code which defined in ISO 3166-1 alpha-2 standard.
US
3.33 System->User Management
This section allows users to modify or add management user accounts.