Robustel GoRugged R2000 User Manual

Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.2.0 15.12.2015 79 /120
Confidential
DDNS
Item
Description
Default
Enable
Click to enable DDNS function.
OFF
Service Provider
Select the DDNS service from “DynDNS”, “NO-IP”, “3322”.
Note: the DDNS service only can be used after registered by
Corresponding service provider.
DynDNS
Hostname
Enter the Host name of the DDNS server provided.
Null
Username
Enter the user name of the DDNS server provided.
Null
Password
Enter the password of the DDNS server provided.
Null
Status
Item
Description
Default
Status
Show current status of DDNS service.
Null
Last Update Time
Show the time that DDNS updated successfully at last time.
Null
3.21 Services->VRRP
This section allows users to set the VRRP parameters.
VRRP
Item
Description
Default
VRRP
VRRP (Virtual Router Redundancy Protocol) is an Internet protocol that
provides a way to have one or more backup routers when using a statically
configured router on a local area network (LAN).Using VRRP, a virtual IP
address can be specified manually.
Null

Robustel GoRugged R2000 Specifications

General

Model	GoRugged R2000
Category	Network Router
Ethernet Ports	2 x 10/100 Mbps
SIM Slots	2
Power Supply	9-36 VDC
USB Port	1 x USB 2.0
Cellular Connectivity	4G LTE, 3G
VPN Support	IPsec, OpenVPN, GRE
Operating Temperature	-40°C to +75°C
WiFi	802.11 b/g/n
Serial Interface	RS232/RS485
GPS	Yes
Firewall	SPI Firewall
Digital Input/Output	2 x DI