Robustel GoRugged R2000 - Page 41

Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.2.0 15.12.2015 40 /120
Confidential
Multiple IP
Item
Description
Default
Interface
Select lan0 or lan1.
When eth0 used As WAN, lan1 is unavailable.
And lan1 available only if it was selected by eth0 or eth1 in
Ethernet->Port Setting section.
lan0
IP Address
Set the multiple IP Address of the LAN interface.
Null
Netmask
Set the multiple Netmask of the LAN interface.
Null
VLAN Trunk
Click to add a VLAN. The maximum number of the VLAN is eight.
VLAN Trunk
Item
Description
Default
Enable
Enable to make router can encapsulate and de-encapsulate the VLAN
tag.
ON
Interface
Select lan0 or lan1.
When eth0 used As WAN, lan1 is unavailable.
And lan1 available only if it was selected by eth0 or eth1 in
Ethernet->Port Setting section.
lan0
VID
Set the Tag ID of VLAN, values range from 1 to 4094.
100
IP Address, Netmask
Set the IP address, Netmask of VLAN interface
Null