Robustel R2000 User Guide
RT_UG_R2000_v.3.0.0 July 24, 2017 101 / 124
Confidential
Chapter 4 Configuration Examples
4.1 Cellular
4.1.1 Cellular Dial-Up
This section shows you how to configure the primary and backup SIM card for Cellular Dial-up. Connect the router
correctly and insert two SIM, then open the configuration page. Under the homepage menu, click Interface > Link
Manager > Link Manager > General Settings, choose “WWAN1” as the primary link and “WWAN2” as the backup link,
and set “Cold Backup” as the backup mode, then click “Submit”.
Note: All data will be transferred via WWAN1 when choose WWAN1 as the primary link and set backup mode as cold
backup. At the same time, WWAN2 is always offline as a backup link. All data transmission will be switched to
WWAN2 when the WWAN1 is disconnected.
Click the edit button of WWAN1 to set its parameters according to the current ISP.
To Next Page
Loading...
Need help?
General
