Robustel R2000 User Guide
RT_UG_R2000_v.3.0.0 July 24, 2017 39 / 124
Confidential
Click the row of the link, and it will show the details information of the current link connection under the row.
Click the button to clear SIM1 or SIM2 monthly data traffic usage statistics. Data statistics will be displayed
only if enable the Data Allowance function in Interface > Link Manager > Link Settings > WWAN Settings > Data
Allowance.
3.7 Interface > LAN
This section allows you to set the related parameters for LAN port. There are two LAN ports on R2000 Router,
including ETH0 and ETH1. The ETH0 and ETH1 can freely choose from lan0 and lan1, but at least one LAN port must
be assigned as lan0. The default settings of ETH0 and ETH1 are lan0 and their default IP are
192.168.0.1/255.255.255.0.
LAN
By default, there is a LAN port (lan0) in the list. To begin adding a new LAN port (lan1), please configure ETH0 or ETH1
as lan1 first in Ethernet > Ports > Port Settings. Otherwise, the operation will be prompted as “List is full”.
To Next Page
Loading...
Need help?
General
