Robustel R2000 User Guide
RT_UG_R2000_v.3.0.0 July 24, 2017 85 / 124
Confidential
Select the events’ save position from “RAM” or “NVM”.
RAM: Random-access memory
NVM: Non-Volatile Memory
Enter the filtering message based on the keywords set by users. Click the “Refresh”
button, the filtered event will be displayed in the follow box. Use “&” to separate
more than one filter message, such as message1&message2.
3.19 Services > NTP
This section allows you to set the related NTP (Network Time Protocol) parameters, including Time zone, NTP Client
and NTP Server.
Click the drop down list to select the time zone you are in.
Specify the time zone with Daylight Saving Time in TZ environment
variable format. The Time Zone option will be ignored in this case.
Click the toggle button to enable/disable this option. Enable to
synchronize time with the NTP server.
Enter primary NTP Server’s IP address or domain name.
Enter secondary NTP Server’s IP address or domain name.
Enter the interval (minutes) synchronizing the NTP client time with the
NTP server’s. Minutes wait for next update, and 0 means update only
once.
Click the toggle button to enable/disable the NTP server option.
To Next Page
Loading...
Need help?
General
