Robustel R2000 User Manual

Robustel R2000 User Guide
RT_UG_R2000_v.3.0.0 July 24, 2017 81 / 124
Confidential
Tunnel Settings @ GRE
Item
Description
Default
Index
Indicate the ordinal of the list.
--
Enable
Click the toggle button to enable/disable this GRE tunnel.
ON
Description
Enter a description for this GRE tunnel.
Null
Remote IP Address
Set the remote real IP address of the GRE tunnel.
Null
Local Virtual IP Address
Set the local virtual IP address of the GRE tunnel.
Null
Local Virtual Netmask
Set the local virtual Netmask of the GRE tunnel.
Null
Remote Virtual IP Address
Set the remote virtual IP Address of the GRE tunnel.
Null
Enable Default Route
Click the toggle button to enable/disable this option. When enabled, all
the traffics of the router will go through the GRE VPN.
OFF
Enable NAT
Click the toggle button to enable/disable this option. This option must be
enabled when router under NAT environment.
OFF
Secrets
Set the key of the GRE tunnel.
Null
Status
This section allows you to view the status of GRE tunnel.
3.17 Services > Syslog
This section allows you to set the syslog parameters. The system log of the router can be saved in the local, also
supports to be sent to remote log server and specified application debugging. By default, the “Log to Remote” option
is disabled.

Robustel R2000 Specifications

General

Model	R2000
Category	Network Router
Cellular Connectivity	4G LTE
WAN Ports	1
Ethernet Ports	2
Input Voltage	9-36 VDC
SIM Slots	2
Certifications	CE, FCC, RoHS
Operating Temperature	-40°C to 75°C