Robustel R2000 User Guide
RT_UG_R2000_v.3.0.0 July 24, 2017 25 / 124
Confidential
3.2 Factory Default Settings
Before configuring your router, you need to know the following default settings.
3.3 Log in the Router
To log in to the management page and view the configuration status of your router, please follow the steps below.
1. On your PC, open a web browser such as Internet Explorer, Google or Firebox, etc.
2. From your web browser, type the IP address of the router into the address bar and press enter. The default IP
address of the router is 192.168.0.1, though the actual address may vary.
3. In the login page, enter the username and password, choose language and then click LOGIN. The default
username and password are “admin”.
Note: If enter the wrong username or password over six times, the login web will be locked for 5 minutes.
To Next Page
Loading...
