Robustel R2000 - 3.12 Network > Firewall; Filtering Rules and Access Control

Robustel R2000 User Guide
RT_UG_R2000_v.3.0.0 July 24, 2017 60 / 124
Confidential
3.12 Network > Firewall
This section allows you to set the firewall and its related parameters, including Filtering, Port Mapping and DMZ.
Filtering
The filtering rules can be used to either accept or block certain users or ports from accessing your router.
Filtering
Item
Description
Default
General Settings
Enable Filtering
Click the toggle button to enable/disable the filtering option.
ON
Default Filtering Policy
Select from “Accept” or “Drop”. Cannot be changed when filtering
rules table is not empty.
 Accept: Router will accept all the connecting requests except the
hosts which fit the drop filter list
 Drop: Router will drop all the connecting requests except the
hosts which fit the accept filter list
Accept
Access Control Settings
Enable Remote SSH Access
Click the toggle button to enable/disable this option. When enabled,
the Internet user can access the router remotely via SSH.
OFF
Enable Local SSH Access
Click the toggle button to enable/disable this option. When enabled,
the LAN user can access the router locally via SSH.
ON