Robustel R2000 - Page 104

Robustel R2000 User Guide
RT_UG_R2000_v.3.0.0 July 24, 2017 104 / 124
Confidential
XML command:
<lan >
<network max_entry_num="2" >
<id > 1</id >
<interface > lan0</interface >
<ip > 172.16.10.67</ip >
<netmask > 255.255.0.0</netmask >
<mtu > 1500</mtu >
SMS cmd:
set lan network 1 interface lan0
set lan network 1 ip 172.16.10.67
set lan network 1 netmask 255.255.0.0
set lan network 1 mtu 1500
3. The semicolon character (‘;’) is used to separate more than one commands packed in a single SMS.
4. E.g.
admin:admin;status system
In this command, username is “admin”, password is “admin”, and the function of the command is to get the
system status.
SMS received:
hardware_version = 1.0
firmware_version = "3.0.0"
kernel_version = 3.10.49
device_model = R2000
serial_number = 111111111
system_uptime = "0 days, 06:17:32"
system_time = "Thu Jul 6 17:28:51 2017"