Robustel R2000 User Guide
RT_UG_R2000_v.3.0.0 July 24, 2017 52 / 124
Confidential
General Settings @ Access Point
Click the toggle button to enable/disable the WiFi access point
option.
Select from “11bgn Mixed”, “11b Only”, “11g Only” or “11n
Only”.
11bgn Mixed: Mix three agreements, for backward
compatibility
11b only: IEEE 802.11b，11Mbit/s~2.4GHz
11g only: IEEE 802.11g，54Mbit/s~2.4GHz
11n only: IEEE 802.11n，300Mbps~600Mbps
Select the frequency channel, including “Auto”, “1”, “2”…… “13”.
Auto: Router will scan all frequency channels until the best
one is found
1~13 Router will be fixed to work with this channel
Following are the frequency of 1~13 channel:
1: 2412 MHz
2: 2417 MHz
3: 2422 MHz
4: 2427 MHz
5: 2432 MHz
6: 2437 MHz
7: 2442 MHz
8: 2447 MHz
9: 2452 MHz
10: 2457 MHz
11: 2462 MHz
12: 2467 MHz
13: 2472 MHz
Enter the Service Set Identifier, the name of your wireless
network. The SSID of a client and the SSID of the AP must be
identical for the client and AP to be able to communicate with
each other. Enter 1 to 32 characters.
Click the toggle button to enable/disable the SSID being
broadcast. When enabled, the client can scan your SSID. When
disabled, the client cannot scan your SSID. If you want to connect
to the router AP, you need to manually enter the SSID of router
AP at WiFi client side.
To Next Page
Loading...
Need help?
General
