Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.4.0.0 27 March, 2017 76/136
Confidential
Select from “Default”, “FQDN” and “User FQDN” for IKE negotiation.
Default: Uses an IP address as the ID in IKE negotiation
FQDN: Uses an FQDN type as the ID in IKE negotiation. If this option is
selected, type a name without any at sign (@) for the local security
gateway, e.g., test.robustel.com.
User FQDN: Uses a user FQDN type as the ID in IKE negotiation. If this
option is selected, type a name string with a sign “@” for the local
security gateway, e.g., test@robustel.com.
Enter the private key under the “CA” and “xAuth CA” authentication types.
Enter the username used for the “xAuth PSK” and “xAuth CA” authentication
types.
Enter the password used for the “xAuth PSK” and “xAuth CA” authentication
types.
Set the lifetime in IKE negotiation. Before an SA expires, IKE negotiates a
new SA. As soon as the new SA is set up, it takes effect immediately and the
old one will be cleared automatically when it expires.
If click VPN > IPsec > Tunnel > General Settings, and choose ESP as protocol. The specific parameter configuration is
shown as below.
If choose AH as protocol, the window of SA Settings is displayed as below.
To Next Page
Loading...
Need help?
General
