CMU Tables
1100.4903.12 5 E-9
Tables
Table 1-1 Software installation with the VersionManager .................................................................. 1.20
Table 3-1
Operation of popup menus....................................................................................................3.9
Table 3-2 Assignment of numerical keys and alphanumeric characters............................................ 3.12
Table 3-3 Operation of select fields.................................................................................................... 3.14
Table 3-4 Measurements in function group RF (Non Signalling) ....................................................... 3.17
Table 3-5 Measurements in function group Audio (with option CMU-B41)........................................ 3.18
Table 4-1
Transmission parameters of the serial interfaces .............................................................. 4.12
Table 4-1 I/Q-IF scenarios and path settings ..................................................................................... 4.73
Table 5-1
Synchronization with *OPC, *OPC? and *WAI................................................................... 5.15
Table 5-2 Meaning of the bits used in the status byte........................................................................ 5.20
Table 5-3 Meaning of the bits used in the event status register......................................................... 5.21
Table 5-4 Meaning of the bits used in the STATus:OPERation:CMU:SUM1:CMU1
sub-register assigned to the CMU base system ................................................................ 5.22
Table 5-5 Meaning of the bits used in the STATus:OPERation:CMU:SUM1|2:CMU<nr>
sub-register assigned to RF Non Signalling....................................................................... 5.22
Table 5-6 Resetting instrument functions........................................................................................... 5.27
Table 5-7 Repetition mode in remote control ..................................................................................... 5.34
Table 6-1
Common Commands.............................................................................................................6.1
Table 6-1 List of remote-control commands: CMU base system ....................................................... 6.89
Table 6-2 List of remote-control commands: RF measurements ....................................................... 6.91
Table 6-3 List of remote-control commands: Audio Measurements................................................... 6.96
Table 6-4 Alphabetical list of remote-control commands: Base system........................................... 6.101
Table 6-5 Alphabetical list of remote-control commands: RF........................................................... 6.102
Table 6-6 Alphabetical list of remote-control commands: Audio ...................................................... 6.105
Table 8-1
Universal Commands ............................................................................................................8.4
Table 8-2 Addressed Commands..........................................................................................................8.4
Table 8-3 Transmission parameters of the RS-232 interface................................................................8.7
Table 8-4 Control strings or control characters of the RS-232-C interface ...........................................8.7
To Next Page
Loading...
