Putting into Operation R&S FSH3
Tracking generator output (model 1145.5850.13 and 1145.5850.23 only)
Connect the tracking generator output to the DUT via an N connector. The nominal output level is
-20 dBm (100 µW). With model 1145.5850.23, the level can be switched between –20 dBm and 0 dBm
(1 mW).
Caution!
The output is AC-coupled and a voltage that does not exceed the voltage stated on the
housing can be fed into the output; if this voltage is exceeded, the output may be
destroyed.
1145.5973.12 1.6 E-6
To Next Page
Loading...
