Saving and Recalling Settings and Test Results R&S FSH3
Saving and Recalling Settings and Test Results
Instrument settings and results can be saved to the R&S FSH3’s internal CMOS RAM. Results and
settings are always stored together so that when results are recalled, they can be interpreted in context.
The R&S FSH3 can store a maximum of 100 data sets, each with a unique name.
Saving Measurement Results
¾ Press the SAVE / PRINT key.
¾ Press the SAVE softkey.
An input box opens and the user is prompted to enter a
name for the data set to be saved.
It suggests the name for most recently stored data set
in the 'Name:' entry box which is highlighted in red.
When you press the ENTER key or the SAVE softkey
a second time, the data set is saved under the
suggested name.
By pressing the BACK key the R&S FSH3 browses through the list of names of the already stored data
sets and shows them with the 1
st
available free extension. That way the name of the data set recalled
for a specific measurement can be selected for storage of the measurement data.
A new name can be entered via the numeric keypad. The numeric keypad has the same letter
assignment as mobile-phone keypads. Enter the letter above the key by pressing the key the
appropriate number of times.
The number of free memory locations is also displayed.
¾ Enter a name for the data set using the numeric keypad.
¾ Confirm with ENTER.
The data set is saved to the R&S FSH3’s internal memory under the specified name.
1145.5973.12 2.20 E-6
To Next Page
Loading...
