PIN Code Entry R&S FSH3
PIN Code Entry
To prevent unauthorized use, the R&S FSH3 can be protected with a PIN code.
When the R&S FSH3 is delivered, the PIN code is set to 0000 and PIN code entry is disabled when the
R&S FSH3 is switched on. A PIN code, i.e. a four-digit number, can be re-entered whenever you wish.
But it is only activated after the PIN code mode has been enabled.
A new PIN code is entered as follows:
¾ Press the SETUP key to call the Setup menu and
the instrument settings.
¾ Press the GENERAL softkey.
Use the Rotary knob or the Cursor keys to select the
PINCODE... menu item and press the ENTER key.
The selection box with the PIN code settings is
opened.
The current PIN code must be entered before it can be modified. This prevents unauthorized PIN code
modification.
¾ Enter your valid PIN code.
When the R&S FSH3 is delivered the valid PIN code is 0000.
When you have entered your valid PIN code, the PIN-code functions can be selected from the
selection box. When the R&S FSH3 has been delivered, a new PIN code can only be activated if it
differs from the factory-set PIN code.
Note: Before the PIN code mode is activated, we strongly recommend entering a user-defined
PIN code. Keep your PIN code in a secure place away from the R&S FSH3. If the active
PIN code is not available the instrument can be reset to the default PIN code ('0000') with
the Master PIN code delivered with each instrument. If the Master PIN code is not
available please contact an authorized R&S service center.
Entering a new PIN code
¾ Use the Rotary knob or the Cursor keys to select the New Pincode... menu item in the selection box
and enter a new four-digit PIN. Confirm with ENTER.
The R&S FSH3 will ask you to re-enter the PIN, to prevent incorrect entries.
¾ Re-enter PIN.
Activating the PIN code mode
¾ Use the Rotary knob or the Cursor keys to select the PINCODE ON menu item and press the
ENTER key.
The R&S FSH3 now asks you to enter the PIN code prior to its activation.
¾ Enter the PIN code and confirm the entry with the ENTER key.
1145.5973.12 1.14 E-6
To Next Page
Loading...
