Putting into Operation R&S FSH3
Setting the screen color
¾ Press the SETUP key.
¾ Press the DISPLAY softkey.
The submenu with the contrast, lighting and color
settings opens.
¾ Use the rotary knob or the cursor keys to select
TYPE... and confirm the selection with the ENTER
key or by pressing the DISPLAY softkey again.
¾ In the submenu that opens, select COLOR or
BLACK/WHITE.
¾ Confirm the selection with the ENTER key or by
pressing the DISPLAY softkey again.
The R&S FSH3 switches to the selected color settings.
1145.5973.12 1.8 E-6
To Next Page
Loading...
