R&S FSH3 Trace Settings
Operating sequence:
¾ Press the TRACE key.
¾ Press the TRACE MODE softkey.
The submenu for setting the trace mode opens.
¾ Using the cursor keys or the rotary knob, select the
trace mode you want and confirm with the ENTER
key or the TRACE MODE softkey.
The "Trace:" display at the center of the top of the
display shows the trace mode that has been selected.
In the trace mode VIEW, the settings used for measuring the trace are displayed. This ensures that the
measurement conditions can be clearly specified in result documentation. In the status display
(STATUS key) it is indicated in brackets that the view mode is currently selected, e.g. Trace Mode:
Maximum Hold (View).
1145.5973.12 4.19 E-6
To Next Page
Loading...
