❍ String Hold/Str
You can apply this hold effect to the strings of
your choice. As with “SoS” above, the synth
sound being played at the instant you press the
pedal is sustained, and continues even if the string
stops vibrating.
What’s different is that even without releasing the
pedal, the synth sound from strings not being held
can still be controlled with the guitar. This makes
it possible to do things like hold the synth sound
on strings 5 and 6, and play a melody over that
with synth sound played by strings 1 through 4.
Releasing the pedal stops both the sound being
played with the guitar as well as the held sound.
Here are the fifteen types, which can be selected by
using the [+] and [-] buttons, as they actually appear
(when Arpeggiator is off).
dPr
This damper hold works on all internal and exter-
nal MIDI sound generators.
d.-1
This damper hold works only on the first internal
sound generator.
d.-2
This damper hold works only on the second inter-
nal sound generator.
d.-b
This damper hold works on both the first and sec-
ond internal sound generators. (Not effective on
external sound generators.)
d.-E
This damper hold works only on external MIDI
sound generators.
d.1E
This damper hold works on the first internal
sound generator and on external MIDI sound gen-
erators.
d.2E
This damper hold works on the second internal
sound generator and on external MIDI sound gen-
erators.
SoS
This sostenuto hold works on all internal and
external MIDI sound generators.
S.-1
This sostenuto hold works only on the first inter-
nal sound generator.
S.-2
This sostenuto hold works only on the second
internal sound generator.
S.-b
This sostenuto hold works on both the first and
second internal sound generators. (Not effective
on external sound generators.)
s.-E
This sostenuto hold works only on external MIDI
sound generators.
S.1E
This sostenuto hold works on the first internal
sound generator and on external MIDI sound gen-
erators.
S.2E
This sostenuto hold works on the second internal
sound generator and on external MIDI sound gen-
erators.
Str
This string hold works on all internal and external
MIDI sound generators.
➼
When Arpeggiator is on, the fifteen choices shown above
are reduced to four: “dPr”; “SoS”; “Lt.A”; and “Lt.B”.
At such times, the Hold function is effective only on
arpeggios, and you can use it in special ways such as
changing the arpeggios to chords without the rhythm of
the arpeggios being stopped. For more detailed informa-
tion about this, please refer to (p. 53).
48
To Next Page
