Checking the Machine Status
<Self Test>
Execute a self test to check the status of the machine. Use this to check the machine when it appears to be not
operating correctly. A computer is not required in order to carry out the self test.
If the self test cannot be executed, the machine may have malfunctioned. Contact your authorized Roland DG
Corp. dealer.
Procedure
Make sure the material is loaded in the machine.
Press [MENU] several times to display the screen shown in the figure.
Press [ ] several times to display the screen shown in the figure.
Press the [ ] key, the [ ] key, the [ ] key, and then press the [ ] key.
To Next Page
Loading...
Need help?
General