Troubleshooting
The Machine Doesn't Run
The Machine Doesn't Run
The Material Is Jammed
Jammed Material Cannot Be Removed
Flat Material Cannot Be Set Up Using "PIECE" (Length Is Not Displayed)
Flat Material Cannot Be Set Up Using "PIECE" (Length Is Not Displayed)
Creating or Importing Data
Changing the Darkness of an Aligned Image
Illustrator Data Cannot Be Imported
Sample Data Cannot Be Found
The Material Slips Away from the Pinch Rollers during Cutting
The Material Slips Away from the Pinch Rollers during Cutting
Crop Marks Cannot Be Read
Crop Marks Cannot Be Read
Cutting Results Are Not Clean
The Results of Cutting Are Displaced When Using the Printing and Cutting Function
Uncut Areas Remain or Cut Edges Are Not Clean
The Machine Cuts the Carrier Paper
To Next Page
Loading...
