EasyManuals Logo

Roland Quad-Capture User Manual

Roland Quad-Capture
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
48
Troubleshooting
Voice Communication Software Settings (Windows 8.1/8/7)
If you are using voice communication software, the volume of the audio device can be adjusted
automatically to suit the conversation.
Use the following procedure to disable automatic volume adjustment.
1. Open the Control Panel, click [Hardware and Sound], and then click [Sound].
If you have selected Icon view, click [Sound].
2. In the [Communications] tab, set “When Windows detects communications activity” to
[Do nothing].
3. Click [OK] to close “Sound.
Monitoring Function Settings (Windows 8.1/8/7)
If the monitoring function of Windows is enabled, the input sound may be doubled (each sound is
echoed) or feedback may be heard.
Use the following procedure to disable the monitoring function of Windows.
1. Open the Control Panel, click [Hardware and Sound], and then click [Sound].
If you have selected Icon view, click [Sound].
2. In the “Recording area, click the QUAD-CAPTURE’s [1-2 (QUAD-CAPTURE)], and then
click [Properties].
3. Click the “Listen” tab and clear the [Listen to this device] check box.
4. Click [OK] to close “Properties.
5. Click [OK] to close “Sound.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland Quad-Capture and is the answer not in the manual?

Roland Quad-Capture Specifications

General IconGeneral
Audio Resolution24-bit/192 kHz
USBUSB 2.0
MIDIIn/Out
Direct MonitoringYes
TypeAudio Interface
Preamps2x VS Preamps
OS CompatibilityWindows, macOS
Inputs2x XLR/TRS combo
Phantom PowerYes (48V, switchable on inputs 1-2)
Channels4
DriverASIO, Core Audio
Dimensions185 mm x 134 mm x 44 mm / 7-5/16 inches x 5-5/16 inches x 1-3/4 inches

Related product manuals