Roland Quad-Capture User Manual

50
Troubleshooting
Mac OS X
1. Start up the computer without the QUAD-CAPTURE connected.
Disconnect all USB cables other than those for a USB keyboard and/or USB mouse (if used).
2. Insert the included CD-ROM into the computer’s DVD-ROM drive.
3. Double-click [Uninstaller] in the [MacDriver] folder on the included CD-ROM.
4. When “This uninstalls QUAD-CAPTURE driver from this Mac.” appears, click [Uninstall].
If other messages appear, follow the instructions on the screen.
5. When “Are you sure you want to uninstall the driver?” appears, click [OK].
The authentication dialog box or the message “Uninstaller requires that you type your password” will
appear.
6. Enter the password and click [OK].
7. When “Uninstallation is completed.” appears, click [Restart] to restart the computer.
It may take some time for the computer to restart.

Roland Quad-Capture Specifications

General

Audio Resolution	24-bit/192 kHz
USB	USB 2.0
MIDI	In/Out
Direct Monitoring	Yes
Type	Audio Interface
Preamps	2x VS Preamps
OS Compatibility	Windows, macOS
Inputs	2x XLR/TRS combo
Phantom Power	Yes (48V, switchable on inputs 1-2)
Channels	4
Driver	ASIO, Core Audio
Dimensions	185 mm x 134 mm x 44 mm / 7-5/16 inches x 5-5/16 inches x 1-3/4 inches