130
Detailed Settings for Each Function ([EDIT] Button)
Changing the Beat Syncopation
(Rhythm/Arpeggio Grid)
This sets the minimum value of the notes comprising Rhythms
and arpeggios and adjusts the amount of swing (None/
Weak/Strong).
This setting is shared by the Arpeggiator settings.
Making the Sound More Staccato or
Legato (Rhythm/Arpeggio Duration)
This sets the duration of the sound. You can make it more
staccato (short and clipped), or legato, so notes are played
longer.
This setting is shared by the Arpeggiator settings.
Selecting the MIDI Output Connector
(Rhythm MIDI Out Port)
This sets the MIDI connector (port) from which the Rhythm part
is to be output.
If the System parameter “MIDI OUT3 MODE”
setting (p. 110) is set to THRU, the Rhythm will not
be output even if you choose the “3 (MIDI OUT 3)”
setting.
Selecting the MIDI Output Channel
(Rhythm MIDI Out Channel)
This sets the channel used for outputting Rhythm parts as MIDI
output.
Parameter
Value Description
Rhy/Arp
Grid
(Rhythm/
Arpeggio
Grid)
1/4
Quarter note
(one grid section = one beat)
1/8
Eighth note
(two grid sections = one beat)
1/8L
Eighth note shuffle Light
(two grid sections = one beat, with
a light shuffle)
1/8H
Eighth note shuffle Heavy
(two grid sections = one beat, with
a heavy shuffle)
1/12
Eighth note triplet
(three grid sections = one beat)
1/16
Sixteenth note
(four grid sections = one beat)
1/16L
Sixteenth note shuffle Light
(four grid sections = one beat, with
a light shuffle)
1/16H
Sixteenth note shuffle Heavy
(four grid sections = one beat, with
a heavy shuffle)
1/24
Sixteenth note triplet
(six grid sections = one beat)
NOTE
Parameter
Value Description
Rhy/Arp
Duration
(Rhythm
Arpeggio
Duration)
30, 40, 50,
60, 70, 80,
90, 100,
120 (%)
For example, when set to “30,”
the length of the note in a grid (or
when a series of grids is
connected with ties, the final grid)
is 30% of the full length of the note
set in the grid type.
Ful
(Full)
Even if the linked grid is not
connected with a tie, the same
note continues to sound until the
point at which the next new sound
is specified.
Parameter Value
MIDI OUT Port
ALL, INT (INTERNAL),
1 (MIDI OUT 1),
2 (MIDI OUT 2),
3 (MIDI OUT 3), USB
Parameter
Value
MIDI Channel
(MIDI Out Channel)
OFF, 1–16
NOTE
NOTE
RD-700GX_e.book 130 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
