Roland RD-700GX - Storing Settings to Setups ([SETUP WRITE] Button)

67
Using the Convenient Functions in Performances
If you want to use the changed content as a new Setup, use the following procedure to
save the settings to a Setup.
You can also change the name of a Setup.
You can store 100 Setups on the RD-700GX.
fig.Q2-19p
1.
Press the [SETUP WRITE] button, getting the indicator to light.
The Setup screen appears.
fig.Q2-20ge
2.
Press the Cursor [ ] [ ] buttons to move the cursor to the positions where the
characters are to be input.
3.
Use the [DEC] [INC] buttons or the VALUE dial to enter the characters.
The following characters are available.
space, ! " # $ % & ' ( ) * + , - . / 0–9 : ; < = > ? @ A–Z [ \ ] ^ _ ` a–z { | } ~
When the [F2] button is pressed, a single-character blank space is inserted; pressing the [F1]
button deletes one character.
You can use the TONE SELECT buttons to directly specify and enter characters.
4.
Repeat steps 2–3 to input the name.
5.
Press the Cursor [ ] button to move the cursor to the destination Setup name.
Pressing the Cursor [ ] button, even while inputting the name, moves the cursor to
the save-destination Setup number.
Storing Settings to Setups ([SETUP WRITE] Button)
New Setup Name
Destination
RD-700GX_e.book 67 ページ ２００８年２月１３日 水曜日 午後５時４９分