73
Using the Convenient Functions in Performances
Here’s how to select and play an audio file set that’s saved in USB memory.
1.
Connect the USB memory containing the audio file set to the USB MEMORY connector (p.
27).
2.
Press the [AUDIO KEY] button.
The AUDIO KEY screen appears.
3.
Press the [F1 (SELECT)] button.
The following screen appears
4.
Use the [DEC] [INC] buttons or the VALUE dial to select an audio file set, and press the
[F2 (LOAD)] button.
The file will be loaded into the RD-700GX, and a screen like the following will appear.
If USB memory containing an audio file set is not connected when you turn on the
Audio Key function, an audio file that’s already in the RD-700GX will be selected.
Selecting the Audio File Set
RD-700GX_e.book 73 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
