Roland RD-700GX - Using Convenient Performance Functions; Arpeggio and Rhythm Pattern Operations

54
Using the Convenient Functions in Performances
The RD-700GX can automatically produce arpeggios based on the notes you hold down.
fig.Q2-01p
1.
Press the [ARPEGGIO] button, getting the indicator to flash.
2.
Press a key A0–B3.
The arpeggio starts, with the notes being played in the sequence the keys were pressed.
fig.Q2-02arp
3.
If you press the [ARPEGGIO] button once more, the indicator light goes out, and the
keyboard returns to the normal performance mode.
At the factory settings, arpeggios continue playing even after the keys are released,
but you can also have arpeggios stop playing when you release the keys (p. 132).
When the Arpeggio’s Arpeggio Hold is set to ON in Edit mode (p. 132), the
[ARPEGGIO] button’s indicator flashes.
For more detailed information, including applicable key ranges and instructions for
playing arpeggios, refer to “Making Arpeggio Settings” (p. 131).
When you are performing arpeggios while a Rhythm is playing, the arpeggio stops
playing at the same time the Rhythm stops.
Playing Arpeggios ([ARPEGGIO] Button)
B3A0
Key ranges in which arpeggios can be played
RD-700GX_e.book 54 ページ ２００８年２月１３日 水曜日 午後５時４９分