132
Detailed Settings for Each Function ([EDIT] Button)
Selecting the Zone for the Arpeggio
Performance (Arpeggio Zone)
This sets the zone to be used for the arpeggio performance
when multiple tones are used (p. 41).
Setting the Key Range for the
Arpeggio Performances
(Arpeggio Key Range)
You cannot perform in the normal manner in the range set for
arpeggio performances, but you can specify the range used
for the arpeggios, which even allows you, for example, to split
the keyboard and play arpeggios as accompaniment in the
left side, and the melody in the right.
Specify the leftmost and rightmost keys in the range to be used
for arpeggios.
Keeping the Force of the Notes
Constant (Arpeggio Velocity)
This allows the arpeggiated notes to sound at a fixed velocity
regardless of the strength of your keyboard playing touch.
Even if Arpeggio Velocity is set to a value other
than “REAL,” the sound’s velocity changes in with
the Arpeggio Style and Arpeggio Accent values.
Rhythm/Arpeggio Grid
Refer to p. 130.
Rhythm/Arpeggio Duration
Refer to p. 130.
Changing the Octave Range in Arpeggio
Style (Arpeggio Octave Range)
Sets the key range in octaves over which arpeggio will take
place.
If you want the arpeggio to sound using only the notes that you
actually play, set this parameter to 0. To have the arpeggio
sound using the notes you play and notes 1 octave higher, set
this parameter to +1. A setting of -1 will make the arpeggio
sound using the notes you play and notes 1 octave lower.
Changing the Accent Strength
(Arpeggio Accent)
Modifies the strength of accents and the length of the notes to
adjust the “groove” feel of the arpeggio. A setting of 100%
will produce the most pronounced groove feel.
Continuing Arpeggios Even After the
Keys Are Released (Arpeggio Hold)
When the hold setting is switched on, you can have arpeggios
continue to play even after you release the keys.
The [ARPEGGIO] button’s indicator flashes when
the Arpeggio Hold is set to ON.
Parameter
Value
Arp Zone (Arpeggio Zone)
UPPER1, UPPER2, LOWER1,
LOWER2, ALL
Parameter
Value
Key Range
A0–C8
Parameter
Value Description
Arp
Velocity
(Arpeggio
Velocity)
REAL
Reproduces the actual strength of
the keyboard touch.
1–127
Sets the velocity at a fixed valued,
regardless of the keyboard touch.
Parameter Value
Arp Octave Range
(Arpeggio Octave Range)
-3–+3
Parameter
Value
Arp Accent (Arpeggio Accent)
0–100%
Parameter
Value Description
Arp Hold
(Arpeggio Hold)
ON
Arpeggios continue to play
even after the keys are
released.
OFF
Arpeggios stop playing when
the keys are released.
Switching Hold On and Off with the Buttons
Even when not in the Edit screen, you can use the buttons
to turn the Hold function on and off.
• Hold down the [ARPEGGIO] button and press
the [CONTROL/ZONE LEVEL] button.
Hold is turned on or off each time the button is pressed.
RD-700GX_e.book 132 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
