32
Overview of the RD-700GX
When changing settings values, you can use the [DEC] and [INC] buttons, VALUE dial, or the
TONE SELECT buttons (numeric keys).
fig.00-G12p
[DEC] Button, [INC] Button
Pressing the [INC] button increases the value, and the [DEC]
button decreases it.
If you want the value to continue changing, simply hold down
the [DEC] button or [INC] button. For faster value increases,
keep the [INC] button pressed down and press the [DEC]
button. For decreasing value faster, keep the [DEC] button
pressed down and press [INC] button.
Simultaneously pressing the [DEC] and [INC] buttons sets that
parameter to the standard default value or switches it off.
VALUE Dial
Turn the dial clockwise to increase the value, or counter-
clockwise to decrease the value.
TONE SELECT Buttons (Numeric Keys)
When the [NUM LOCK] button is on (lit), numerical values can
be input directly using the TONE SELECT buttons, which then
serve as the [0]–[9] button numeric keys.
When you enter the number, the value will blink. This indicates
that the value has not yet been finalized. To finalize the value
press the [ENTER] button.
With some parameters, the [NUM LOCK] button may come on
automatically, allowing you to input numerical values directly
with the TONE SELECT buttons.
Only numerical values can be entered using the
numeric keys. To switch the positive (+) or negative
(-) signs for numerical values and make continuous
changes in the numerical values, press the [DEC]
or [INC] button.
Editing a Value
RD-700GX_e.book 32 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
