Roland SP-404MK - Using MFX Effects

UsingtheEffects > AddingEffectstoaSample(BUSFX)
UsingtheMFXEffects
YoucanselectandusetheeffectsyoulikefortheMFXeffects.
Whileholdingdownthe[MFX]button,turnthe[VALUE]knoborthe[CTRL3]knobtoselecttheeffectto
use.
Youcanalsousepads[1]‒[16]insteadofthe[VALUE]knoborthe[CTRL3]knobtoselectaneffect.
Tousepads[1]‒[16]toselecteffectsfrom#17andup,holddownthe[MFX]buttonandthe[DJFX
LOOPER]buttonatthesametime.
1
Afterselectingtheeffect,takeyourfingeroffthe[MFX]button.
Theeffectturnson,andtheeffecteditscreenappears.
2
Playbackasample.
3
Usethe[CTRL1]‒[CTRL3]knobstoadjusttheparameters.
Youcanalsoaccesstheeffectsub-parametersbyholdingdownthe[VALUE]knobandoperatingthe
knobs.
4