Roland SP-404MK - Deciding Effects Per Sample

UsingtheEffects > AddingEffectstoaSample(BUSFX)
DecidingonEffectstoUseforEachSample
Setswhichsampleplaybackaudioissenttowhichbus(meaningwhicheffectsareused)foreachsample.
Inthisexample,weapplytheeffectassignedtoBUS2tothesampleonpad[1].
Setwhicheffectisappliedtothebusbeforehand.Fordetails,referto“AssigningEffectstoBUS1andBUS2.”
Thepadʼscolortellsyouthebustowhichthesampleissent.
Padcolor Audiosenddestination(bus)
Litorange BUS1
Litgreen BUS2
Litwhite ThesoundisnotsenttoBUS1orBUS2(DRY).
PreventingsamplesfrombeingsenttoBUS1/BUS2
YoucanpreventtheplaybackaudioofsamplesfrombeingsenttoBUS1orBUS2(DRY).Inthiscase,noeffectsare
appliedtothesamples.
SendingtheaudioinputfromtheINPUTjacktoabus
Aswiththesamples,youcansetthebustowhichtheplaybackaudiosignalscomingintotheINPUTjackaresent
(meaningwhicheffectsareused).
Fordetails,referto“SendingtheAudioInputfromtheINPUTJacktoaBus.”
Pressthe[BUSFX]buttontoselectBUS2.
1
Holddownthe[REMAIN]buttonandpressthepad[1].
Theplaybackaudioforthesampleassignedtopad[1]issenttotheeffectassignedtoBUS2.
Pad[1]lightsupgreenatthistime.
2
Whileholdingdownthe[REMAIN]button,pressthepad[1]‒[16]buttonsanumberoftimestomake
themlightupwhite.
TheBUS1andBUS2effectsarenotappliedtothesamplesofpadsthatarelitupwhite.
1