Roland SP-404MK - Performing Sampling

Sampling(SAMPLING)
Sampling
Thisshowshowtosample(record)theaudiothatʼsinputtedintothisunittocreateyourownsamples.
Pressthe[REC]button.
Emptypadstowhichsampleshavenʼtbeenassignedblinkred.
Themetronomesoundswhenthe“Metronome:REC”parameteris“ON”(theSYSTEMparameter“CLICK”).
Presspad[9]whileholdingdownthe[SHIFT]buttontoturnthemetronomesoundon/off.
1
Usethe[CTRL1]knobtoadjustthetempoduringsampling(thesampletempo),andusethe[CTRL3]
knobtoadjustthevolumeofaudioinputfromanexternaldevice.
1
Presspads[1]‒[16]thatareblinkingred.
2
Pressthe[REC]button.
Samplingbegins.
Ifyoudecidetocancelsampling,pressthe[EXIT]button.
3
Toquitsampling,pressthepads[1]‒[16]usedforsamplingorthe[REC]buttononcemore.
Thesampleissavedtothepad.
4