Roland SP-404MK - Control Section (2)

Introduction > PanelDescriptions
ControlSection(2)
[PATTERNSELECT]button
Presstoselectapattern.Thepatternsequencerturnson.
1
[PATTERNEDIT]button
Pressthiswhenthepatternsequencerisontodisplaythepatterneditscreen.Fromhereyoucanedit
thepattern.
2
[RECORDSETTING]button
Pressthistomakethesettingsforsamplingandforpatternrecording.Thesettingscreenappears.
3
[DEL]button
Pressthistoerasethesampleorpatterndata.
4
[REC]button
Pressthistosampleortorecordapattern.
5
[RESAMPLE]button
Pressthistoresample.
6
[EXIT]button
Pressthistoreturntothepreviousscreenortoundoanoperation.
7
[COPY]button
Pressthistocopyasampleorpattern.
8
[REMAIN]button
Whilethisbuttonispressed,thedatathatʼssetforthelastpadyoupressedisshown.
9