EasyManua.ls Logo

Roland SP-404MK - Control Section (3)

Roland SP-404MK
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction > PanelDescriptions
ControlSection(3)
[START/END]button
Pressthistosettheplaybackrange(startpointandendpoint)forasample,ortoeditasample.
1
[PITCH/SPEED]button
Pressthistosetthepitchandspeedatwhichasampleplaysback.
2
[MARK]button
Pressthistosetamarker,orwhenyouwanttouseskip-backsampling.
3
[VALUE]knob
Turntheknobtoeditaparameterortoselectanitem.
Presstheknobtoconfirmaparameterortoexecuteanoperation.
4
[BPMSYNC]button
Pressthistomakeasampleorpatternplaybackinsyncwiththetempo.
ThesampleʼsplaybackspeedissynchronizedwiththetemposetonthisunitorwiththeMIDIclocks
receivedviatheUSBportortheMIDIINconnector.
5
[GATE]button
Turnsthegatefunctionon/off.
6
[LOOP]button
Turnstheloopfunctionon/off.
7
[REVERSE]button
Turnssamplereverseplaybackon/off.Whenthisison,thesampleplaysbackinreverse.
8
[ROLL]button
Turnstherollplaybackon/off.Whenthisison,thesampleisplayedbackindetailedstepsatthe
specifiedlength.
Youcanchangethelengthofasample(howfasttherollplays)bypressingthe[ROLL]buttonwhile
holdingdownthe[SHIFT]button.
9
Bank[A/F]‒[E/J]buttons
Switchesbetweenbanks.
10
[SHIFT]button
Pressthistomakeapadorbuttonuseanalternatefunction.
11

Related product manuals