Roland SP-404MK - Automatic Marker Addition

Automaticallyaddingmarkersbasedonconditions(AUTO
MARKfunction)
YoucanusetheAUTOMARKfunctiontoautomaticallyaddmarkersbasedoncertainconditionsyouspecify.
Holddownthe[SHIFT]buttonandpressthe[START/END]button.
Themarkersettingscreenappears.
2
Pressthepad[1].
Thesampleplaysback.
3
Pressthepads[2]‒[16]thatareblinkingblue,atthetimingwhereyouwanttoaddamarker.
Thisaddsthemarkertothesample.Youcanpresspads[1]‒[16]topreviewtheaudioatthe
correspondingmarker.
4
Presspads[1]‒[16]toselectthesampletowhichyouwanttoaddmarkers.
1
Holddownthe[SHIFT]buttonandpressthe[START/END]button.
Themarkersettingscreenappears.
2
Pressthe[VALUE]knob.
Amenuappears.
3
Usethe[VALUE]knobtoselect“AUTOMARK,”andpressthe[VALUE]knob.
TheAUTOMARKsettingscreenappears.
4
Usethe[VALUE]knobor[CTRL2]knobtoselectaparameter.
Parameter Value Explanation
TIME
DIVISION
2‒16 Addsmarkersbydividingupthesampleequally.
LEVEL 1‒10 Addsamarkeratthelocationinthesamplewherethelevelsexceeda
certainvalue.
TRANSIENT HARD,
MID,
Addsamarkeratthelocationinthesamplewherethereisalarge
changeinvolume,suchaswhenasoundwithsharpattackplays.
5